About Us
Media
Contact
Contact
Low Speed Vehicle Battery 60V20Ah
Low Speed Vehicle Battery 60V20Ah
Provides power to low speed vehicles like 2/3 wheelers. Designed to be "Deep-cycle" that means the battery system can be discharged until almost empty, voltage nominal 60V and energy is 1.28kWh.
A+ class LiFePO4(Lithium Iron Phosphate) cells, up to 3000cycles(8-10years). The capacity remains higher than 80% after 2000+cycles, even after 3500+cycles(10-12years), the capacity can still be over 70%.
Battery cells packing process is completely in accordance with the standards of EV Battery production, embracing the laser welding techniques to ensure every cell to be soldered completely, avoiding insufficient or poor soldering.
Use Manual
-
Safe & Endurable
Self-developed BMS provides the ultmost protection to battery, compatible with major Inverter brands.
-
Smart BMS
The battery detection unit is installed in the battery pack, which can accurately and real-time detect the battery voltage, temperature, capacity and other conditions, which can fully improve the safety of the product.
-
10 Years Design Life
A-class battery cells, with the protection of BMS, the system can deliver up to 10 years servicelife.
-
Reliable
Longer lifespan Laser Welding Rigid tests before shipment.
-
Adaptable
Self-heating function, consistent and efficient at -20 to 50 degrees.
-
Intelligent Monitoring
Monitor the battery status at any time on the APP, while the LCD window displays real-time data, battery charging, discharge and other data at a glance.
-
LiFePO4
A+ Tier Cells
-
64V
Voltage
-
1.28kWh
Energy
-
≥3500
Battery Cycles
-
5years
Warranty
| 60V20Ah- EV Battery- Low Speed Vehicles | |||
| SPECIFICATIONS | |||
| Rated Capacity | 20Ah | ||
| Rated Energy | 1.28kWh | ||
| Nominal Voltage | 64V | ||
| Dimension | 280*170*140mm | ||
| Weight | approx. 11kg | ||
| Charge Cut-off Voltage | 73V | ||
| Discharge Cut-off Voltage | 50V | ||
| Rated Charge Current | 10A | ||
| Rated Discharge Current | 30A | ||
| Rated Discharge Current in 30S | 50A | ||
| Communication | CAN/RS485 | ||
| Port of Charge & Discharge | Same Port | ||
| Protection Level | IP65 | ||
| Working Temperature | Charge: 0～45℃ | ||
| Discharge: -20～60℃ | |||
| Storage Temperature | 10~45℃ | ||
| State of Charge(SOC) before Shipment | 30%~50% | ||
| PROTECTION PARAMETERS | |||
| Single Cell Over Charge | Protection Voltage | 3.68V | Can be set manually |
| Restore Voltage | 3.60V | Can be set manually | |
| Protection Delay | 5.0s | Can be set manually | |
| Restore Conditions |
1.Auto restore once the voltage drops to the value. 2.Detecting there is a valid discharging current from battery. |
||
| Single Cell Over Discharge | Protection Voltage | 2.5V | Can be set manually |
| Restore Voltage | 2.9V | Can be set manually | |
| Protection Delay | 5.0s | Can be set manually | |
| Restore Conditions |
1.Auto restore once the voltage rises to the value. 2.Detecting there is a valid charging current from battery. |
||
| Total Voltage Over Charge | Protection Voltage | 73V | Can be set manually |
| Restore Voltage | 70V | Can be set manually | |
| Protection Delay | 5.0s | Can be set manually | |
| Restore Conditions |
1.Auto restore once the total voltage drops to the value. 2.Detecting there is a valid discharging current from battery. |
||
| Total Voltage Over Discharge | Protection Voltage | 50V | Can be set manually |
| Restore Voltage | 58V | Can be set manually | |
| Protection Delay | 5.0s | Can be set manually | |
| Restore Conditions |
1.Auto restore once the voltage rises to the value. 2.Detecting there is a valid charging current from battery. |
||
| Charge Over Current | Protection Current | 22A | Can be set manually |
| Protection Delay | 5.0s | Can be set manually | |
| Restore Conditions |
1.Auto restore and re-detect every 2minutes, stops after 10times repetition. 2.Detecting there is a valid discharge current. |
||
| Discharge Over Current | Protection Current | 48A | Can be set manually |
| Protection Delay | 15s | Can be set manually | |
| Restore Conditions |
1.Auto restore and re-detect every 2minutes, stops after 10times repetition. 2.Detecting there is a valid charge current. |
||
| Temperature | Top Charge Temperature | 65℃ | Can be set manually |
| Lowest Charge Temperature | 0℃ | Can be set manually | |
| Top Discharge Temperature | 65℃ | Can be set manually | |
| Lowest Discharge Temperature | -10℃ | Can be set manually | |
Residential ESS
Austrilia 20.58kWp
Inverter 10kW Battery FD5000C-20kWh
Residential ESS
Austrilia 20.58kWp
Inverter 10kW Battery FD5000C-20kWh
Residential ESS
Austrilia 20.58kWp
Inverter 10kW Battery FD5000C-20kWh
EV Battery Swapping Solution
Since its establishment, RAJA has been focusing on the continuous development of intelligent products, network integration and big data, cloud computing platform. In different stages of the life cycle of new energy batteries, application management can be carried out in different scenarios to realize resource recovery and cascade utilization, covering the whole life cycle management of batteries.
Learn More >
EV Battery Swapping Solution
Since its establishment, RAJA has been focusing on the continuous development of intelligent products, network integration and big data, cloud computing platform. In different stages of the life cycle of new energy batteries, application management can be carried out in different scenarios to realize resource recovery and cascade utilization, covering the whole life cycle management of batteries.
Learn More >
EV Battery Swapping Solution
Since its establishment, RAJA has been focusing on the continuous development of intelligent products, network integration and big data, cloud computing platform. In different stages of the life cycle of new energy batteries, application management can be carried out in different scenarios to realize resource recovery and cascade utilization, covering the whole life cycle management of batteries.
Learn More >
